The Bowl

The Bowl

My bowl was made by first cutting a circle from the provided metal with tin-snips. By tracing the provided template of concentric circles, and using the lines as guides, I formed the bowl shape using a nylon-hammer, initially with a stump and then using a sandbag. My bowl has a radius of 275mm. Using the large english wheel i smoothed out the dents and finished it by sanding out any scratches and polishing it.



Comments

Post a Comment

Popular posts from this blog

The Torus

Image
The Torus The torus, otherwise known as a reverse curve is created when a form curves in two opposite directions, similar to the form of the inside of a doughnut.  To create this form i used a stump and a nylon mallet, holding the metal bent around the stump and gently and gradually hammering the reverse curve into shape.
Read more

Assignment 3: Reflection

Image
Assignment 3: Reflection Throughout this semester i have really enjoyed this course, learning how to shape metal and the processes that went along with it. While the course was very different to what i expected, i learnt a lot of interesting knowledge and  skills. Probably my favorite aspect of the course is having  a tangible finished project at the end, especially after assignment one. Studying Landscape Architecture is enjoyable, however design assignments are never more than conceptual, and will never be actually implemented. Thus holding a finished project is a very satisfying feeling. Finished Bowl In assignment two, we had to really consider how to get the desired form, which was challenging as in my  studios i am designing a finished landscape, and usually don't put much thought into how it will be built. This challenge  really altered my design process, and i think in the future i will be much more aware of how something i ...
Read more

Assignment 2: 1:1 Fuel Tank

Image
Assignment 2 - 1:1 Fuel Tank Introduction The aim of this assignment was to create an aluminum skin that would cover a motorcycle fuel tank. Within a group of ten, we had to digitally model the decided tank and create a laser-cut model to use as a guide for creating the skin. The brief was to split the tank into three sections and have them match up to form a full aluminum skin at the end. YAMAHA IT 250 Fuel Tank Modelling the Tank The first step in modelling the tank was to convert the physical form into a digital model. To achieve this we used Autodesk; recap, and a function within it called Photogrammetry. This works by taking many photos of many different angles of the object, and then stitching them together to create a digital form. My first attempt at doing this wasn't successful, and one side was extruded in a weird way. Russell suggested that we take more photos and use tape on the tank,to make it easier for photogrammetry to stitch it togeth...
Read more